Camaro ZL1 (5th generation) to CWA100-3 Adapter Kit

A bundle consisting of the Pierburg CWA100-3 water pump and an adapter cable,
to be able to easily replace the original intercooler pump in the ZL1 with the CWA one.

This replaces the original GM water pump with part number 22901367.

Attention:
The adapter cable is an experimental product!
We offer it at the request of some customers but cannot guarantee the full functionality.
But it seems to work fine with those cars. The original pump holder can most likely still be used for that.

Explanation:
With the ZL1 (5th Gen), the original GM water pump is apparently not speed controlled.
The pump is connected in such a way that it always runs at full speed.
Our adapter cable is also connected in this way. The CWA pump will then also run at full speed.

Unfortunately, we are not Camaro experts and cannot say whether and to which additional models this may apply, too..

Liability:
Please use the product only if you know what you are doing.
We cannot be held liable for any errors or damages in any form!
Especially when it comes to damages on your car, engine or the product itself!

Pierburg CWA100-3

The CWA100-3 is a successor of the CWA100-2 we are also offering. The dimensions and the weight are nearly the same.
New is the freshly designed impeller housing with slightly shorter water in and outlets and the bigger electrical connector.
This improves the handling of bigger cable diameters significantly.
Suitable for instance for intercooling in combustion engine vehicles and cooling of various systems in electrical vehicles.

Specifications:

• Name: "Pierburg CWA100-3"
• Operation voltage: 8-16 volts
• Weight: approx. 1.00 kg
• Current consumption: 8.5A max. / (approx. 0.2mA in standby mode)
• Nominal diff. pressure: ≥ 0.75 bar *
• Flow rate: approx. 30-35 l/min @ 0.75bar / 40-45 l/min @ 0.50bar
• Speed: approx. 7000 rpm
• Temperature range: -40°C – 110°C (water) / -40°C – 120°C (ambient)
• Protection: IP 67 + IP 69 K

Downloads:

Datasheet:
CWA100-3 Datasheet EN (pdf)

3D CAD files:
CWA100-3 3D CAD (zip)